Call 07971381157 36% Response Rate

our range

Sick Sensors

Our range of products include sick up56 pure level sensor, sick lfp cubic level sensor, sick lfv200 level sensor, sick up56 level sensor, sick lbv300 level sensors and sick cfp cubic level sensor.
Sick UP56 Pure Level Sensor

Sick UP56 Pure Level Sensor

Price on Request
Minimum Order Quantity1 Unit
Usage/ApplicationIndustrial
TypeUltrasonic Sensors
BrandSick
I Deal InNew Only
MeasurmentSwitch, Continuous
Detection principleNon contact
Pure reliability

The non-contact ultrasonic level sensors from the UP56 Pure product family are a range of products specialized for wet chemical processes in the electronic and solar industry. Due to their PTFE-protected transducer they are very hardwearing and durable and are designed to be used in highly concentrated acids and alkalines. The UP56 Pure is easy and fast to integrate thanks to the industry-specific GF process connection. A high level of accuracy can also be achieved with fluctuating liquid densities, thus facilitating the use of dosing applications. In systems where the installation is extremely cramped, the UP56 Pure Mini is the perfect solution thanks to its very compact design. The use in containers with a lot of built-in components is easily resolved by means of an immersion pipe. The measurement range, output, and filters of the UP56 product family is easy and convenient to adjust with the PC-based programming tool Connect+.

At a glance
  • Ultrasonic level sensor with very high chemical resistance
  • Non-contact measurement in immersion pipe of up to 1,500 mm
  • PTFE-coated membrane and GF D40 process connection made of PTFE
  • Pressure resistant up to 6 bar, temperature resistant up to 85°C
  • Different sizes available
  • Analog output selectable between 4 mA to 20 mA and 0 V to 10 V
  • Switching output for monitoring the maximum and minimum limit

View Complete details

get quoterequest a call back
Sick LFP Cubic Level Sensor

Sick LFP Cubic Level Sensor

Price on Request
Minimum Order Quantity1 Unit
Usage/ApplicationIndustrial
TypeLFP Cubic
BrandSick
I Deal InNew Only
MeasurmentSwitch, Continuous
MediumFluids
Measurement PrincipleTDR sensor
Flexible up to the probe tip

The LFP Cubic is a level sensor for liquids using TDR technology – a process for determining the time of flight of electromagnetic waves. The time difference between the sent pulse and the reflected pulse is used to generate a level signal. The sensor can emit this a as continuous measured value (analog output) and a freely positionable switching point (switching output). The LFP Cubic is compatible for use in virtually any liquid. Thanks to its modular probe, the sensor can be integrated quickly into any application. It can even be used in deposit-forming and foaming liquids. The sensor’s intuitive setup uses four pushbuttons and a display to ensure quick and easy adaptation to the application. Remote amplifier, IO-Link interface, and a design which features a process connection in titanium are additional features for versatile use.

At a glance
  • Level sensor for liquids
  • No mechanical moving parts
  • Interchangeable rod probe which can be cut to lengths between 200 mm and 2,000 mm (cable probe up to 4,000 mm)
  • Resistant to deposit formation
  • Process temperature up to 100 °C,process pressure up to 10 bar
  • 3 in 1: combines display, analog output (according to NAMUR NE 43), and binary output
  • High enclosure rating of IP 67, rotatable housing and remote amplifier
  • IO-Link 1.1

View Complete details

get quoterequest a call back
Sick LFV200 Level Sensor

Sick LFV200 Level Sensor

Price on Request
Minimum Order Quantity1 Unit
Usage/ApplicationIndustrial
TypeLevel Sensor
BrandSick
I Deal InNew Only
Measurement PrincipleVibrating level switch
MeasurementSwitch
The intelligent limit switch for all kinds of liquids

The vibrating level switch of the LFV200 product family detects the pre-defined levels in liquid systems with maximum precision. Whether indicating that a container has reached its maximum fill level (overfill protection) or that it is empty or used in pipes to prevent the pumps from running dry, the LFV200 works with all liquids and is wear- and maintenance-free. A high surface quality and the rugged tuning fork made of stainless steel make the LFV200, in combination with aseptic process connections, the first choice for applications even with the strictest hygiene requirements. With the LFV230, extended pipe variants up to 1,200 mm are available. With IO-Link, the oscillation frequency, amplitude and temperature of the sensor can be read out in addition to the switching signal, which enables extended diagnostics and predictive maintenance.

At a glance
  • Commissioning without container filling or medium calibration
  • Immune to deposit formation
  • Process temperature up to 150 °C
  • Two electrical output versions and IO-Link available
  • Pipe extension up to 1,200 mm
  • Hygienic designs with polished surface, CIP- and SIP-capable
  • Housing made of 316L stainless steel
  • Very high repeatability

View Complete details

get quoterequest a call back
Sick UP56 Level Sensor

Sick UP56 Level Sensor

Price on Request
Minimum Order Quantity1 Unit
Usage/ApplicationIndustrial
TypeLevel Sensor
BrandSick
I Deal InNew Only
Model NumberUP56
MeasurementSwitch, Continuous
Tough, non-contact, pressure-resistant

The product family UP56 of ultrasonic level sensors is the ideal solution for demanding applications. The teflon-protected transducer handles overpressure up to 6 bar (87 psi) and is resistant against numerous difficult fluids. Wetted parts can be chosen either as stainless steel or PVDF, thus making the UP56 the perfect solution for measurement in aggressive, viscous, or abrasive liquids, or bulk solids. By combining two output signals in one device, new cost-effective solutions can be created for measurement and integration into the system. With two switching outputs, the UP56 can measure dry running and overflow in one device. Combining analog and a switching output enables continuous level measurement with a separate overflow signal. Parameters are easy to set via an integrated display, PC or the connect+ adapter.

At a glance
  • Non-contact measurement up to 3.4 m operating distance / 8.0 m scanning distance limit
  • Pressure resistant up to 6 bar
  • Converter protected by PVDF cover for increased resistance
  • 3-in-1: Continuous measurement, switching signal, and display
  • Analog output can be switched 4 mA ... 20 mA and 0 V ... 10 V
  • Process connector thread G 1 and G 2
  • IP67 enclosure rating
  • Simple operation, also via Connect+

View Complete details

get quoterequest a call back
Sick LBV300 Level sensors

Sick LBV300 Level sensors

Price on Request
Minimum Order Quantity1 Unit
Usage/ApplicationIndustrial
TypeLBV300
BrandSick
I Deal InNew Only
Detection PrincipleContact
MeasurementSwitch
Accuracy Of Sensor Element+ - 10 mm

Tuning forks – tough and flexible in bulk

Solids

The rugged, reliable, and highly accurate vibrating level switches in the LBV300 product family signal full, empty, or demand states in bulk materials. The tuning fork reacts to changes in density, and thus operates independently of silo shape or the tank material used. The rugged stainless steel tuning fork is piezo-electrically energized and vibrates at its resonance frequency when it is covered by bulk materials. This change is detected and converted into a switching signal. While the LBV310 compact device is used for horizontal mounting and to signal full states, the LBV320 cable-extended switch and the LBV330 tube-extended switch are used for vertical mounting in silos and bridge sensing ranges of up to 80 m and 6 m respectively. With a wide variety of thread and flange connections, and several electronic variants, the LBV330 offers a solution for almost all applications, even in potentially explosive atmospheres.

At a glance
  • Tough device design
  • Several housing materials and electrical outputs available
  • Immune to deposit formation
  • Commissioning without filling
  • Process temperature up to 250 °C
  • Very high repeatability
  • ATEX versions (1D/2D/1G/2G) available
  • Tube-extended version (LBV330) up to 6 m and rope extensions version (LBV320) up to 80 m available for vertical mounting

View Complete details

get quoterequest a call back
Sick CFP Cubic Level Sensor

Sick CFP Cubic Level Sensor

Price on Request
Minimum Order Quantity1 Unit
Usage/ApplicationIndustrial
TypeCFP Cubic
BrandSick
I Deal InNew Only
MeasurmentSwitch, Continuous
output Signal2 X PNP/NPN/Push-Pull
Multifunctional sensor for level and temperature measurement

The CFP Cubic is a capacitive level sensor for taking continuous level, limit, and simultaneous temperature measurements. Thanks to intelligent MCiM technology (multi-capacitive intra-probe measuring), the CFP Cubic measures media over the entire length of the probe – irrespective of the container material and without the need for additional accessories. The probe’s plastic surface prevents deposits and ensures high resistance to aggressive media. The sensor’s intuitive setup uses a guided menu to ensure quick and easy adaptation to the measuring task. IO-Link allows the process data to be integrated into an automation network.

At a glance
  • Continuous level measurement and temperature measurement as well as level and temperature switches
  • Measurement irrespective of container material
  • Probe from 100 mm to 1,000 mm
  • Display and intuitive menu navigation
  • No mechanical moving parts
  • IP 67 enclosure rating and IO-Link 1.1
  • No dead zone along the measuring range

View Complete details

get quoterequest a call back
Sick LBV301 Level Sensor

Sick LBV301 Level Sensor

Price on Request
Minimum Order Quantity1 Unit
Usage/ApplicationIndustrial
TypeLBV301
BrandSick
I Deal InNew Only
MeasurmentBulk solids

The vibrating level switches in the LBV301 product family can be relied upon to signal full, empty, or demand states in bulk materials. The monoprobe design prevents bulk materials from jamming. The rugged stainless steel sensor design is piezo-electrically energized. When the probe is covered with bulk materials, the change in vibration amplitude is reliably detected and converted into a switching signal. As the monoprobe is easy to clean, the sensors are even suitable for use in the food industry. While the LBV311 compact device is used for horizontal mounting, the LBV321 cable-extended switch and the LBV331 tube-extended switch are used for vertical mounting in silos and bridge sensing ranges of up to 80 m and 6 m respectively. With a variety of process connections for hygienic applications and several electronic variants, the LBV301 can be used for nearly all applications, even in explosive atmospheres.

At a glance
  • Compact sensor from 1" thread
  • Monoprobe design prevents bulk materials from sticking or jamming
  • Polished monoprobe for food applications
  • Commissioning without filling and medium calibration
  • Process temperature up to 250 °C
  • ATEX certifications (1D/2D/1G/2G) available
  • Tube extension variant (LBV331) up to 6 m and cable extension model (LBV321) up to 80 m available for vertical mounting

View Complete details

get quoterequest a call back
Sick GRF18S Level Sensor

Sick GRF18S Level Sensor

Price on Request
Minimum Order Quantity1 Unit
Usage/ApplicationIndustrial
TypeOptical level switch
BrandSick
I Deal InNew Only
MeasurmentSwitch
Easy, compact and rugged

The GRF18S is a compact optical level switch which is characterized mainly by its extremely simple commissioning. The proven technology of the energetic photoelectric proximity sensor from SICK is the foundation for the sensor. This allows for easy, rugged and reliable sensor construction. Thanks to the use of high-quality materials such as stainless steel 1.4404 and polysulfone as well as the housing design in enclosure rating IP69, the GRF18S guarantees high process reliability, even under harsh ambient conditions outside the tank. Quick and problem-free commissioning, without medium calibration, reduces not only commissioning costs, but also maintenance. Due to the optical technology, the GRF18S is particularly well-suited for water-based media.

At a glance
  • Rugged fill level measurement in fluid media
  • Small, compact design; no medium calibration required
  • Process temperature up to 55 °C, process pressure up to 16 bar
  • IP 67 and IP 69 enclosure rating
  • Process connection G ½
  • Highly medium resistant due to stainless steel housing 1.4404, polysulfone apex
  • Output available as PNP or NPN transistor
  • FDA compliant, UL

View Complete details

get quoterequest a call back
Sick LFV300 Level Sensor

Sick LFV300 Level Sensor

Price on Request
Minimum Order Quantity1 Unit
Usage/ApplicationIndustrial
TypeLFV300
BrandSick
I Deal InNew Only
Flexible and robust – Tuning Forks for all kinds of liquids

The LFV300 product family of universal vibrating level switches precisely detects predefined liquid levels in systems to the millimeter – even under difficult operating conditions. The switches can emit a signal to prevent overfilling, a switching signal for refilling, or a dry-run signal for pump protection. The LFV300 works independently of the liquid and is wear-free and maintenance-free. A wide selection of flange, threads, and hygienic connections together with a modular device concept enable customer-specific solutions. The device is suitable for hygienic applications and can be cleaned using SIP/CIP. There are also variants for use in explosive atmospheres, to prevent overfilling in compliance with WHG, and with marine certification (GL). Besides the rugged LFV310 standard device, there are LFV330 tube-extended variants for reliable vertical mounting to bridge sensing ranges up to 6 m.

At a glance
  • Choice of various housing materials and electrical output signals
  • Commissioning without filling
  • Process temperature up to 250 °C
  • Immune to deposit formation
  • Very high repeatability
  • Hygienic designs according to EHEDG and FDA, compatible for CIP and SIP
  • ATEX approval available
  • Tube extension up to 6 m in length

View Complete details

get quoterequest a call back
Sick LFP Inox Level Sensor

Sick LFP Inox Level Sensor

Price on Request
Minimum Order Quantity1 Unit
Usage/ApplicationIndustrial
TypeLFP Inox
BrandSick

The LFP Inox is a hygienic level sensor for liquids using TDR technology – a process for determining the time of flight of electromagnetic waves. The time difference between the sent pulse and the reflected pulse is used to generate a level signal, both as a continuous value (analog output) and a freely positionable switching point (switching output). The use of FDA-compliant materials in an EHEDG-certified design means that the LFP Inox can be relied upon for optimum and unrestricted cleaning, even in applications with the most stringent hygiene requirements. Its modular connection system allows simple and flexible installation in any application. Thanks to high temperature and pressure resistance, unrestricted use is possible under CIP and SIP conditions. This impressive profile is topped off with communication capability via IO-Link to the superordinate control units.

At a glance
  • Level measurement in hygienic applications
  • Rod probe can be cut to length manually up to 4,000 mm long with Ra ≤ 0.8 µm
  • Process temperature up to 180 °C, process pressure up to 16 bar
  • CIP/SIP-resistant
  • High enclosure rating: IP 67 and IP 69, autoclavable
  • Interchangeable hygienic process connections
  • 3 in 1: combines display, analog output, and binary output
  • Remote amplifier with process connection
  • IO-Link 1.1

View Complete details

get quoterequest a call back

EXPLORE MORE CATEGORIES