Call 07971381157 36% Response Rate

our range

Sick Encoders

We are a leading Manufacturer of sick dks40 60 degree c incremental encoder, sick dbs60 300 khz inox incremental encoder, sick dgs34 incremental encoder, sick dfs60 inox incremental encoder, sick dbs50 core incremental encoders and sick dbs36 core incremental encoder from Pune, India.
Sick DKS40 60 Degree C Incremental Encoder

Sick DKS40 60 Degree C Incremental Encoder

Price on Request
Minimum Order Quantity1 Unit
Brandsick
Usage/ApplicationIndustrial
Encoder TypeIncremental Encoder
Shaft TypeIncremental Encoder
Mechanical versionSolid shaft face mount flange
Electrical interfaceOpen Collector NPN TTL/RS422 HTL/Push pull
Maximum output frequencyLess Then 50 kHz / Less Then 200 kHz
Ambient temperature0 Degree C +60 Degree C
Rugged, high-performance incremental encoder

The DKS40 incremental encoder offers an outstanding price-performance ratio. Its housing is made of solid zinc die cast and, with an external diameter of 50 mm, it is extremely compact, saving valuable installation space. Use of mini-disc technology makes the DKS40 extremely resistant to shock and vibration. In addition, the DKS40 has a high IP 64 enclosure rating

At a glance
  • Compact housing
  • Durable, low-cost design
  • Interfaces: Open collector NPN, TTL/RS-422 or HTL/push pull.
  • Connection via cable outlet, for radial or axial use with open ends or fitted with an M12 connector
  • Face mount flange with solid shaft
  • Housing for simple clamping ring mounting
  • Any line count possible from 1 to 2,048

View Complete details

get quoterequest a call back
Sick DBS60 300 kHz Inox Incremental Encoder

Sick DBS60 300 kHz Inox Incremental Encoder

Price on Request
Minimum Order Quantity1 Unit
Brandsick
Usage/ApplicationIndustrial
Encoder TypeIncremental Encoder
Shaft TypeIncremental Encoder
Mechanical designSolid shaft,Square flange,Solid shaft,face mount flange,Blind hollow shaft
Connection TypeMale connector,M12,8-pin,radial 1)Cable,8-wire,radial,5 m 1)
Communication InterfaceIncremental
Voltage area4.5 V 30 V
Rugged incremental encoder made of stainless steel for challenging application conditions

The stainless steel mechanical components as well as the high degree of tightness thanks to the shaft seal make the DBS60 Inox incremental encoder resistant to rough environmental influences. Its stainless-steel housing with IP67 enclosure rating has a diameter of 58 mm, thereby enabling use in challenging applications with limited installation space. The solid shaft models are available with face mount flange and square flange. The hollow shaft design provides optional shaft insulation against high operating temperatures and shaft flows. With various mechanical and electronic interfaces as well as a resolution of up to 5,000 pulses, the DBS60 Inox fulfills customer requirements from various fields of industry.

At a glance
  • Housing, flange, and shaft made from stainless steel
  • Enclosure rating IP67 thanks to shaft sealing ring
  • Designs with blind hollow shaft as well as face mount or square flange with solid shaft
  • Number of lines of up to 5,000 pulses
  • Radial cable connection or M12 male connector
  • TTL/RS-422 and HTL Push Pull, universal TTL/HTL interface with 4.5 - 30 VDC

View Complete details

get quoterequest a call back
Sick DGS34 Incremental Encoder

Sick DGS34 Incremental Encoder

Price on Request
Minimum Order Quantity1 Unit
Brandsick
Usage/ApplicationIndustrial
Encoder TypeIncremental Encoder
Shaft TypeIncremental Encoder
Model NumberDGS34
Mechanical designBlind hollow shaft
Electrical interface5 V, TTL
Maximum output frequency300 kHz / 300 kHz / 600 kHz
Ambient temperature- 20 Degree C + 70 Degree C
Large hollow shaft encoders for rough environmental conditions

The high-resolution DGS34/DGS35 hollow shaft incremental encoder family is a rugged solution for very challenging encoder applications. With generous hollow shaft diameters of up to 1-1/8" or 30 mm, they are ideal for mounting directly on the motor shaft.

At a glance
  • Incremental encoder Ø 3.5"
  • Electrical interface
  • 5V TTL / RS422
  • 8 … 24V TTL / RS422
  • 8 … 24V HTL / push pull
  • 8 … 24V Open Collector"
  • Blind hollow shaft Ø 30 mm, 1”, ½”,5/8”, ¾”, 7/8”
  • Connection type cable 1 m, 1,5 m, 3 m, 5 m, 10 m
  • Number of lines 120 … 16,384

View Complete details

get quoterequest a call back
Sick DFS60 Inox Incremental Encoder

Sick DFS60 Inox Incremental Encoder

Price on Request
Minimum Order Quantity1 Unit
Brandsick
Usage/ApplicationIndustrial
Encoder TypeIncremental Encoder
Shaft TypeIncremental Encoder
Model NumberDFS60 Inox
High-resolution incremental encoder – durable and programmable

The DFS60 Inox is a high-resolution incremental encoder with a diameter of 60 mm in a stainless-steel design. It offers a large range of mechanical and electrical interfaces and can also be programmed by the customer if desired. The rugged mechanical design, the wide temperature range, and the IP 67 enclosure rating make the DFS60 Inox the ideal encoder for applications in harsh ambient conditions. The wide range of programming options for the electrical parameters is unique on the market. This includes the output signal level, the number of pulses per revolution, and the zero pulse width.

At a glance

    Housing, flange, and shaft made from stainless steel
    Face mount flange, servo flange, or square flange with solid shaft and blind hollow shaft
    IP 67 enclosure rating
    Resolution up to 65,536 pulses
    Radial cable outlet or M12 male connector
    Electrical interfaces: TTL/RS-422, HTL/Push Pull, SinCos 1 Vpp
    Can be programmed with the PGT-08-S and PGT-10-Pro as an option

Features
   
High resistance to environmental influences due to stainless-steel housing
   
IP 67 enclosure rating and shaft sealing ring for optimum tightness
   
Simple mounting thanks to compact dimensions, even with limited installation space
   
The wide range of mechanical interfaces allows an optimal match between the encoder and the application-specific installation situation
   
High resolution up to 16 bits enables applications with demanding requirements for measurement accuracy
   
Reduces storage costs and downtimes since customers can program the encoder themselves with programming devices PGT-08-S and PGT-10-Pro
   
Programmable zero pulse position simplifies installation

View Complete details

get quoterequest a call back
Sick DBS50 Core Incremental encoders

Sick DBS50 Core Incremental encoders

Price on Request
Minimum Order Quantity1 Unit
Brandsick
Usage/ApplicationIndustrial
Encoder TypeIncremental Encoder
Shaft TypeIncremental Encoder
Model NumberDBS50 Core
The MultiFit Incremental Encoder

The DBS50 Core incremental encoder features impressively high mechanical flexibility, excellent technical properties, and a number of variations. The DBS50E has a face mount flange with 50 mm diameter and a solid shaft with 8 mm diameter. The housing diameter is extremely compact at 37 mm and thus saves valuable space. The face mount flange offers 2 different mounting hole patterns and a servo groove for mounting with servo clamps. The encoder has compact dimensions and a universal cable outlet that allows for cables to run in an axial or radial direction. The DBS50 Core incremental encoder is fully compatible with the DDS50E incremental encoder.

At a glance
  • Connection with universal cable outlet
  • Face mount flange with 8 mm solid shaft
  • Face mount flange with 2 mounting hole patterns and servo groove
  • Compact housing diameter of 37 mm with compact construction depth, flange diameter 50 mm
  • Various electrical interfaces: TTL/RS-422, HTL/push pull and Open Collector NPN
  • Number of lines from 10 to 2,500 possible
  • Temperature range: –20 °C... +85 °C
  • Enclosure rating: IP 65
Features:
  • The universal cable outlet allows for use in tight spaces and for flexible cabling
  • Face mount flange with various mounting hole patterns for easy device replacement without adapting the application
  • Face mount flange with servo groove makes mounting with servo clamps possible
  • The high flexibility of the mechanical interface of the encoder and the available accessories allow for the use of a single design in many applications
  • The compact housing diameter saves valuable space
  • Long-term and reliable operation thanks to a high enclosure rating, temperature resistance and bearing lifetime

View Complete details

get quoterequest a call back
Sick DBS36 Core Incremental Encoder

Sick DBS36 Core Incremental Encoder

Price on Request
Minimum Order Quantity1 Unit
Brandsick
Usage/ApplicationIndustrial
Encoder TypeIncremental Encoder
Shaft TypeIncremental Encoder
Model NumberDBS36 Core
The MultiFit Incremental Encoder

The DBS36 Core incremental encoder features impressively high mechanical flexibility, excellent technical properties, and a number of variations. A blind hollow shaft with a shaft diameter of up to 8 mm and a face mount flange with 6 mm and 1/4" solid shaft are available. The design with face mount flange offers 2 different flanges with 6 different mounting hole patterns and a servo groove for mounting with servo clamps. The hollow shaft design has a universal stator coupling that can be used for multiple typical mounting hole circles. All models have compact dimensions and a universal cable outlet that allows for cables to run in an axial or radial direction.

At a glance
  • Connection with universal cable outlet
  • Designs with blind hollow shaft or face mount flange with solid shaft
  • Face mount flange with 6 mounting hole patterns and servo groove
  • Hollow shaft with universal stator coupling
  • Compact housing diameter of 37 mm with compact construction depth,
  • Electrical interfaces: TTL/RS-422, HTL/push pull and Open Collector NPN
  • Number of lines: 10 to 2,500
  • Temperature range: –20 °C ... +85 °C
  • Enclosure rating: IP 65
Features:
  • The universal cable outlet allows for use in tight spaces and for flexible cabling
  • Face mount flange with various mounting hole patterns provides high flexibility when mounting in existing and new applications
  • Face mount flange with servo groove makes mounting with servo clamps possible
  • The universal stator coupling of the DBS36 Core allows for easy device replacement without adapting the application
  • Shafts in metric and US design enable worldwide use
  • The high flexibility of the mechanical interface of the encoder and the available accessories allow for the use of a single design in many applications
  • Long-term and reliable operation thanks to a high enclosure rating, temperature resistance and bearing lifetime

View Complete details

get quoterequest a call back
Sick DBS60 Core Incremental Encoder

Sick DBS60 Core Incremental Encoder

Price on Request
Minimum Order Quantity1 Unit
Brandsick
Usage/ApplicationIndustrial
Encoder TypeIncremental Encoder
Shaft TypeIncremental Encoder
Model NumberDBS60 Core
Rugged, versatile incremental encoder for industrial applications

The DBS60 Core is a rugged incremental encoder with a diameter of 58 mm and a compact mounting depth. The portfolio includes solid shaft models with face mount flange and servo flange as well as hollow shaft designs (blind/through hollow shaft) for shafts up to a size of 5/8 inches (15.875 mm). The hollow shafts are available with shaft insulation and with a clamp on the rear housing on request. In addition to the standard interfaces for TTL and HTL, the DBS60 Core also offers two universal interfaces with a large voltage range which unites the 5 V TTL and 24 V HTL as well as 5 V TTL and 24 V TTL in one version. Due to its high enclosure rating, rugged design and a resolution of up to 10,000 pulses, the DBS60 Core is the ideal product for standard use in various industries.

At a glance
  • Face mount and servo flange with various hole patterns
  • Hollow shafts up to 5/8 inches in diameter, optionally insulated; front and rear clamping
  • Housing diameter 58 mm, compact installation depth
  • Number of lines up to 10,000 pulses
  • Cable connection, M12 and M23 male connector, radial
  • TTL/HTL and TTL interfaces with voltage range 4.5 V DC ... 30 V DC
Features:
  • Diverse installation options thanks to different flange and shaft versions as well as flange and stator couplings with different assembly hole patterns
  • Hollow shaft clamp on the rear housing facilitates mounting
  • Various connection types enable flexible cabling
  • Compact housing dimensions save valuable space
  • The encoder is protected from high shaft temperatures and currents due to the insulated hollow shaft
  • Rugged design with large bearing distance allows high shaft loads and a longer service life
  • Only a few product variants due to electrical interfaces with a large voltage range, which reduces storage costs

View Complete details

get quoterequest a call back
Sick DFS60 Incremental Encoder

Sick DFS60 Incremental Encoder

Price on Request
Minimum Order Quantity1 Unit
Brandsick
Usage/ApplicationIndustrial
Encoder TypeIncremental Encoder
Shaft TypeIncremental Encoder
Model NumberDFS60
High-resolution, programmable encoder for sophisticated applications

The DFS60 is a high-resolution incremental encoder with a diameter of 60mm. It offers a wide variety of mechanical and electric interfaces and can also be programmed by the customer if required. Programming of the output signal and zero pulse is a unique feature for the market. The high enclosure rating, wide temperature range and large ball bearing distance ensure extreme robustness, making the DFS60 the ideal encoder for industrial applications in harsh environments

At a glance
  • Short installation depth
  • High resolution of up to 16 bits
  • Optional programming: Output voltage, zero pulse position, zero impulse width, pulse number and counting direction
  • Connection: Radial or axial cable outlet, M23 or M12 male connector, axial or radial.
  • Electrical interfaces: 5 V & 24 V TTL/RS-422, 24 V HTL/push pull, 5 V sin/cos 1 Vss
  • Mechanical interfaces: Face mount flange or servo flange, blind hollow shaft or through hollow shaft
  • Remote zero set possible

View Complete details

get quoterequest a call back
Sick DUS60 Incremental Encoder

Sick DUS60 Incremental Encoder

Price on Request
Minimum Order Quantity1 Unit
Brandsick
Usage/ApplicationIndustrial
Encoder TypeIncremental Encoder
Shaft TypeIncremental Encoder
Model NumberDUS60
Encoders with versatile configuration for machine axes applications

The DUS60 is a rotary incremental encoder with built-in DIP switch configuration for the resolution, output voltage, and counting direction. The DUS60 configuration switches reduce the number of variants, enable easy replacement and quick commissioning, and increases the likelihood that spare parts will be in stock – all without any additional programming tools. The on-board status and signal LEDs and optional fault output quickly indicate the functionality of the encoder, minimizing time required for both installation and troubleshooting. The DUS60 offers solid shaft and hollow bore mounting with rotating connectors or universal cables for quick and flexible mechanical installation. With resolutions up to 2,400 pulses, the DUS60 is ideal for factory and logistics automation applications.

At a glance
  • Solid shaft or hollow bore incremental encoder
  • DIP switches for configuring resolution, signal output,
  • And counting direction
  • Universal 4.5 V ... 30 V supply
  • LEDs that indicate encoder status and output signal
  • Rotatable M12 male connector, 4-pin or 8-pin, or universal cable outlet
  • Optional fault output directly from encoder

View Complete details

get quoterequest a call back
Sick DGS35 Incremental Encoder

Sick DGS35 Incremental Encoder

Price on Request
Minimum Order Quantity1 Unit
Brandsick
Usage/ApplicationIndustrial
Encoder TypeIncremental Encoder
Shaft TypeIncremental Encoder
Model NumberDGS35
Large hollow shaft encoders for rough environmental conditions

The high-resolution DGS34/DGS35 hollow shaft incremental encoder family is a rugged solution for very challenging encoder applications. With generous hollow shaft diameters of up to 1-1/8" or 30 mm, they are ideal for mounting directly on the motor shaft.

At a glance
  • Incremental encoder Ø 3.5"
  • Electrical interface
  • 5V TTL / RS422
  • 8 … 24V TTL / RS422
  • 8 … 24V HTL / push pull
  • 8 … 24V Open Collector"
  • Blind hollow shaft Ø 30 mm, 1”, ½”,5/8”, ¾”, 7/8”
  • Connection type cable 1 m, 1,5 m, 3 m, 5 m, 10 m
  • Number of lines 120 … 16,384

View Complete details

get quoterequest a call back
Sick DFS2x Incremental Encoder

Sick DFS2x Incremental Encoder

Price on Request
Minimum Order Quantity1 Unit
Brandsick
Usage/ApplicationIndustrial
Encoder TypeIncremental Encoder
Shaft TypeIncremental Encoder
Model NumberDFS2x
Factory-configured and user-programmable incremental encoders

The DFS2x family of products are high-resolution incremental encoders that provide industry standard 2 and 2.5-inch mechanical interfaces and are available as factory-configured or programmable devices. Factory-configured encoders can be ordered with TTL, HTL, or open-collector outputs as well as integer resolutions from 1 to 65,536 counts per revolution. Programmable encoders allow the user to select the integer resolution and either TTL or HTL outputs. DFS2x encoders incorporate rugged internal technology that allows them to operate over a wide temperature range and tolerate twice the shock and vibration levels of comparable encoders. The flexibility and reliability of these encoders allows you to confidently standardize on a single encoder platform for position sensing across a wide variety of applications while simultaneously reducing your spare part requirements.

At a glance
  • Compact 2-inch and 2.5-inch design
  • Integer resolutions from 1 to 65,536 pulses per rev
  • Compatible with PGT-08-S PC-based programming tool
  • Programmable encoders allow selection of resolution, signal phase, zero pulse position, and output interface
  • Flange, hollow shaft, and blind hollow shaft options
  • M12 connector, MS connector, and flying lead cable connection options

View Complete details

get quoterequest a call back

EXPLORE MORE CATEGORIES